We send free shipping within Germany!
Built-in motion detector 360°, ceiling mounting, white, IP65
built-in motion detector for ceiling mounting, suitable for LEDs, detection angle max. 360°, shallow installation depth, ideal for false ceilings
item number: 10045031
- material: plastic
- color: white
- sensor type: infrared (passive)
- detection angle: approx. 360°
- detection range: max. 8m
- minimum load: 1W
- switching capacity resistive load: max. 1200W
- switching capacity inductive load: max. 600W
- switching output: relay
- suitable for LEDs
- light sensitivity: from 3 to 2000 lux
- switch-off delay: approx. 10 seconds to 30 minutes
- operation on 230 V~/50 Hz
- connection: 3-wire connection, screw terminals
- installation: flush-mounted (ideal for suspended ceilings)
- outer diameter: approx. 76mm
- height: approx. 49mm
- installation depth: approx. 36mm
- installation diameter: approx. 63 to 66mm
- recommended installation height: 2.2 to 4.0m
- weight: approx. 70g
- temperature range -20 to +40°C
- protection class: IP65 / IP20
- all details according to manufacturer
- color: white
- sensor type: infrared (passive)
- detection angle: approx. 360°
- detection range: max. 8m
- minimum load: 1W
- switching capacity resistive load: max. 1200W
- switching capacity inductive load: max. 600W
- switching output: relay
- suitable for LEDs
- light sensitivity: from 3 to 2000 lux
- switch-off delay: approx. 10 seconds to 30 minutes
- operation on 230 V~/50 Hz
- connection: 3-wire connection, screw terminals
- installation: flush-mounted (ideal for suspended ceilings)
- outer diameter: approx. 76mm
- height: approx. 49mm
- installation depth: approx. 36mm
- installation diameter: approx. 63 to 66mm
- recommended installation height: 2.2 to 4.0m
- weight: approx. 70g
- temperature range -20 to +40°C
- protection class: IP65 / IP20
- all details according to manufacturer
Technical info
white
outdoor area
built-in
ceiling / wall
standard
plastic
230V
IP65
The connection should always be made by a qualified specialist. The applicable accident prevention regulations must be observed. To avoid an electric shock, switch off the power before connecting.
