We send free shipping within Germany!
Damp room series SECURE | Control switch | 250V~/10A, IP44
version: surface-mounted control switch,
maximum power: 250V~/10A,
dimensions: about 80x64x60mm (h-w-d),
protection class: IP44
item number: 10036005
- version: surface-mounted switch with indicator light
- material: plastic
- color: light gray/gray
- operation only on 230V/50Hz
- maximum power: 250V~/10A
- dimensions: about 80x64x60mm (h-w-d)
- screw terminals
- protection class: IP44
- suitable for wet rooms
- Note: LED is on when light is off
- all information according to the manufacturer
Note:
For installation, the rocker switch should be removed carefully.
- material: plastic
- color: light gray/gray
- operation only on 230V/50Hz
- maximum power: 250V~/10A
- dimensions: about 80x64x60mm (h-w-d)
- screw terminals
- protection class: IP44
- suitable for wet rooms
- Note: LED is on when light is off
- all information according to the manufacturer
Note:
For installation, the rocker switch should be removed carefully.
Technical info
grey
damp room / protected outdoor area
assembly
SECURE series
plastic
IP44
Safety instructions and important information!
- Connection or installation must be carried out by qualified personnel only!
- Please never exceed the maximum connection load
. - Do not install near or even on combustible materials like wood etc.
!
- The 230V components must be connected with at least 1.5mm² wire!
- Be sure to observe the VDE and UVV (accident prevention regulations)!
- No installation on or near (50cm distance) flammable materials (ignition temperature >200°C)!
- During all work, completely switch off the circuit in which the installation is carried out at the main fuse! Otherwise there is a DANGER OF LIFE!!
- First check that the connection is correct before switching the voltage back on.
- The device may only be put into operation after a professional functional test!
- Connection or installation must be carried out by qualified personnel only!
- Please never exceed the maximum connection load
. - Do not install near or even on combustible materials like wood etc.
!
- The 230V components must be connected with at least 1.5mm² wire!
- Be sure to observe the VDE and UVV (accident prevention regulations)!
- No installation on or near (50cm distance) flammable materials (ignition temperature >200°C)!
- During all work, completely switch off the circuit in which the installation is carried out at the main fuse! Otherwise there is a DANGER OF LIFE!!
- First check that the connection is correct before switching the voltage back on.
- The device may only be put into operation after a professional functional test!
