We send free shipping within Germany!
HP 3535 LED 3W type "WTN-3W-3535kw" | cold white, 10 pieces
HP 3535 LED 3W, dimensions: 3.5x3.5x2.3mm (l-w-h), light color: white, opening angle: wide beam, voltage: 2.8-3.2V, luminous flux: 250-270lm
item number: 10046150
5.39 €
basic price: 1 Stück = 0.54 €
available
shipping 1 to 4 days**
- light color: white
- color temperature: ca. 6500K
- voltage: 2.8-3.2V
- current: approx. 700mA
- power: approx. 3W
- luminous flux: approx. 250-270lm
- opening angle: wide beam
- dimensions: 3.5x3.5x2.3mm (l-w-h)
- operating temperature: -25°C to +80°C
- storage temperature: -30°C to +85°C
- pulsating peak current: 1000mA
- mounted directly on a circuit board
- LED in silicone resin
- all details according to the manufacturer
Your order includes:
- 10x HP 3535 LED 3W white, type "WTN-3W-3535kw"
- color temperature: ca. 6500K
- voltage: 2.8-3.2V
- current: approx. 700mA
- power: approx. 3W
- luminous flux: approx. 250-270lm
- opening angle: wide beam
- dimensions: 3.5x3.5x2.3mm (l-w-h)
- operating temperature: -25°C to +80°C
- storage temperature: -30°C to +85°C
- pulsating peak current: 1000mA
- mounted directly on a circuit board
- LED in silicone resin
- all details according to the manufacturer
Your order includes:
- 10x HP 3535 LED 3W white, type "WTN-3W-3535kw"
Technical info
cold white
The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the top of package. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when use the picking up nozzle, the pressure on the silicone resin should be proper.
The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. Pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. Pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
