We send free shipping within Germany!
Installation relay 1-pole, 230V AC/24V DC | for DIN rail
installation relay, rated voltage 12 - 240V AC / 24V DC, number of consumers (button) 1, for mounting on DIN rail TH-35, for indoor use only
item number: 10044271
- housing: plastic
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- contact material: AgSnO2
- number of consumers (buttons): 1
- rated voltage: 12 - 240V AC / 24V DC
- permanent current capacity: 16A
- switching capacity: 1W - 4000W
- contact current: minimum 10mA
- switching current: maximum 30A
- switching frequency: max. 600 cycles/h
- contact resistance: = 100mO
- switching frequency: > 0.5 x 10^5
- mechanical resistance (cycles): > 3 x 10^7
- green LED status display U for voltage
- connection via screw terminals
- connection cable cross-section: max. 2.5mm²
- dimensions: approx. 64.6x17.5x90mm (h-w-d)
- weight: about 66g
- working temperature: -20°C ... +50°C
- storage humidity: < 85%
- protection class: IP20
- all details according to the manufacturer
- mounting: DIN rail TH-35
- space requirement: 1 division unit
- contact material: AgSnO2
- number of consumers (buttons): 1
- rated voltage: 12 - 240V AC / 24V DC
- permanent current capacity: 16A
- switching capacity: 1W - 4000W
- contact current: minimum 10mA
- switching current: maximum 30A
- switching frequency: max. 600 cycles/h
- contact resistance: = 100mO
- switching frequency: > 0.5 x 10^5
- mechanical resistance (cycles): > 3 x 10^7
- green LED status display U for voltage
- connection via screw terminals
- connection cable cross-section: max. 2.5mm²
- dimensions: approx. 64.6x17.5x90mm (h-w-d)
- weight: about 66g
- working temperature: -20°C ... +50°C
- storage humidity: < 85%
- protection class: IP20
- all details according to the manufacturer
Technical info
indoor area
power track accessories
plastic
IP20
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- A professional electrician should check connection or installation before switching on power again and operating the device.
