We send free shipping within Germany!
LED PIR wall light PORTAO | neutral white, 230V/15W, IP44
luminous flux: 1000lm, power: 15W, life span: approx. 15.000h, color rendering index CRI: >80
item number: 10045040
- housing: plastic
- colour: white
- voltage: 230V/50Hz (transformer already installed)
- light color: neutral white
- color temperature: 4000K
- luminous flux: 1000lm
- power: 15W (0.9W in standby)
- peam Angle: approx. 110°
- life span: approx. 15.000 hours
- color rendering index CRI: >80
- no glare effect from the milky illuminated surface
- illuminated surface: 85° tiltable, 300° rotatable
- integrated motion detector
- detection range: approx. 9m
- detection angle: approx. 140°
- light sensitivity: 3-2000 LUX
- switching time: approx. 10 seconds to 5 minutes
- dimensions: approx. 232x88x53mm (h-w-d)
- dimensions of the illuminated area: approx. 140x85mm (h-w)
- energy efficiency class G
- weighted energy consumption 15kwh/1000h
- not dimmable
- protection class: IP44
- suitable for indoor and outdoor use
- easy installation thanks to 2-wire technology
- Note: lamps cannot be exchanged!
- all details according to manufacturer
- colour: white
- voltage: 230V/50Hz (transformer already installed)
- light color: neutral white
- color temperature: 4000K
- luminous flux: 1000lm
- power: 15W (0.9W in standby)
- peam Angle: approx. 110°
- life span: approx. 15.000 hours
- color rendering index CRI: >80
- no glare effect from the milky illuminated surface
- illuminated surface: 85° tiltable, 300° rotatable
- integrated motion detector
- detection range: approx. 9m
- detection angle: approx. 140°
- light sensitivity: 3-2000 LUX
- switching time: approx. 10 seconds to 5 minutes
- dimensions: approx. 232x88x53mm (h-w-d)
- dimensions of the illuminated area: approx. 140x85mm (h-w)
- energy efficiency class G
- weighted energy consumption 15kwh/1000h
- not dimmable
- protection class: IP44
- suitable for indoor and outdoor use
- easy installation thanks to 2-wire technology
- Note: lamps cannot be exchanged!
- all details according to manufacturer
The connection should always be made by a qualified specialist. The applicable accident prevention regulations must be observed. When performing any work, completely switch off the circuit in which the installation is carried out at the main fuse! Otherwise there is LIFE!
