We send free shipping within Germany!
Non-contact sensor switch 2-pole | 230V/5A
non-contact switch for glow and LED lighting, 2-pole, detection range between 5 and 6cm, only for indoor use, dimensions 178x35x19mm (l-w-h)
item number: 10031980
- plastic housing, white
- 2-pole, bipolar, switch
- voltage: 110-240V/AC, 50/60Hz
- rated current: 5A
- maximum load incandescent lamps: 500W
- maximum load LED: 125W
- dimensions switch: approx. 78x35x19mm (l-w-h)
- dimensions sensor: approx. 17x15mm (Ø-l)
- installation diameter sensor: approx. 13mm
- detection range: 5-6cm
- cable linking the sensor with the switch: approx. 150cm
- protection class: IP20
- only suitable for dry rooms
- connections via screw terminals
- surface mounting
- all details according to manufacturer
- 2-pole, bipolar, switch
- voltage: 110-240V/AC, 50/60Hz
- rated current: 5A
- maximum load incandescent lamps: 500W
- maximum load LED: 125W
- dimensions switch: approx. 78x35x19mm (l-w-h)
- dimensions sensor: approx. 17x15mm (Ø-l)
- installation diameter sensor: approx. 13mm
- detection range: 5-6cm
- cable linking the sensor with the switch: approx. 150cm
- protection class: IP20
- only suitable for dry rooms
- connections via screw terminals
- surface mounting
- all details according to manufacturer
Technical info
indoor area
built-in
assembly
ceiling / wall
without slot
motion sensor
IP20
Attention:
The connection should always be made by a qualified specialist. The applicable accident prevention regulations must be observed. To avoid an electric shock, switch off the power before working on the device.
The connection should always be made by a qualified specialist. The applicable accident prevention regulations must be observed. To avoid an electric shock, switch off the power before working on the device.
