We send free shipping within Germany!
NUQUI surface-mounted switch with LED, control switch | IP54
version: surface-mounted switch with LED,
maximum power: 250V~/10A,
dimensions: approx. 77x62x55mm (h-w-d),
protection class: IP54
item number: 10047915
- version: surface-mounted switch with LED
- material: plastic
- color: light-grey / grey
- operation only on 230V/50Hz
- maximum power: 250V~/10A
- dimensions: approx. 77x62x55mm (h-w-d)
- Note: LED lights up when light is on (orientation light)
- rubberized cable entry
- robust and weather-resistant
- protection class: IP54
- suitable for indoor and outdoor use
- all details according to the manufacturer
Note:
For installation, the rocker switch should be removed carefully.
- material: plastic
- color: light-grey / grey
- operation only on 230V/50Hz
- maximum power: 250V~/10A
- dimensions: approx. 77x62x55mm (h-w-d)
- Note: LED lights up when light is on (orientation light)
- rubberized cable entry
- robust and weather-resistant
- protection class: IP54
- suitable for indoor and outdoor use
- all details according to the manufacturer
Note:
For installation, the rocker switch should be removed carefully.
Technical info
grey
damp room / protected outdoor area
assembly
NUQUI series
plastic
IP54
Safety instructions and important information!
- Connection or installation must be carried out by qualified personnel only!
- Please never exceed the maximum connection load
. - Do not install near or even on combustible materials like wood etc.
!
- The 230V components must be connected with at least 1.5mm² wire!
- Be sure to observe the VDE and UVV (accident prevention regulations)!
- No installation on or near (50cm distance) flammable materials (ignition temperature >200°C)!
- During all work, completely switch off the circuit in which the installation is carried out at the main fuse! Otherwise there is a DANGER OF LIFE!!
- First check that the connection is correct before switching the voltage back on.
- The device may only be put into operation after a professional functional test!
- Connection or installation must be carried out by qualified personnel only!
- Please never exceed the maximum connection load
. - Do not install near or even on combustible materials like wood etc.
!
- The 230V components must be connected with at least 1.5mm² wire!
- Be sure to observe the VDE and UVV (accident prevention regulations)!
- No installation on or near (50cm distance) flammable materials (ignition temperature >200°C)!
- During all work, completely switch off the circuit in which the installation is carried out at the main fuse! Otherwise there is a DANGER OF LIFE!!
- First check that the connection is correct before switching the voltage back on.
- The device may only be put into operation after a professional functional test!
