We send free shipping within Germany!
PWM power control 9-28 V/DC, max. 10 A, KEMO
KEMO PWM power control to control direct current loads 9-28V/DC max.10A.
item number: 10008994
With this power control you can adjust direct current loads (motor, lamps, heating systems, LED's with protective resistors, etc.).
The PWE setting ranges from 5 to 95%. Please refer to the connection diagram and use cables with a cross section of 1.5 to 2.5 mm². Depending on the load the module can heat up, in this case a sufficient cooling plate must be provided. Please refer to the enclosed instruction manual.
- operating voltage: 9-28V / DC
- current carrying capacity: 5A (10A max. 1min)
- control range: about 5 to 95%
- frequency: between 10 to 20kHz
- dimensions: about 87x60x33mm (l-w-h; with mounting bottom)
- potentiometer: 4.7 k ohm lin
- all data according to the manufacturer
The PWE setting ranges from 5 to 95%. Please refer to the connection diagram and use cables with a cross section of 1.5 to 2.5 mm². Depending on the load the module can heat up, in this case a sufficient cooling plate must be provided. Please refer to the enclosed instruction manual.
- operating voltage: 9-28V / DC
- current carrying capacity: 5A (10A max. 1min)
- control range: about 5 to 95%
- frequency: between 10 to 20kHz
- dimensions: about 87x60x33mm (l-w-h; with mounting bottom)
- potentiometer: 4.7 k ohm lin
- all data according to the manufacturer
Technical info
black
indoor area
Accessories
plastic
