We send free shipping within Germany!
radio receiver-WS | KINETIC | complements switch, 2.300W
Radio receiver WS for switch box from the switch series "KINETIC", complements a switch, range up to 200m with free view
item number: 10033916
15.49 €
unfortunately sold out
shipping 1 to 4 days**
- adds a switch - the receiver is installed behind the switch
- housing: plastic, white
- design: Radio receiver WS, for switch box
- radio frequency: 433.92 MHz
- switching capacity: max. 2300W
- radio range: max. 200m (free view necessary)
- simple teach-in function
- automatic frequency adjustment
- LED function display
- manual ON/OFF switch
- power supply: 230V/50Hz
- integr. overload protection
- dimensions: approx. 45x45x25mm (l-w-h)
- mounting: flush-mounted, suitable for standard flush-mounted boxes
- protection class: IP20
- can be combined with wall switches/transmitters of the radio switch series "KINETIC"
- all details according to manufacturer
Note:
The installation instructions and teach-in function can be found in the enclosed operating instructions.
- housing: plastic, white
- design: Radio receiver WS, for switch box
- radio frequency: 433.92 MHz
- switching capacity: max. 2300W
- radio range: max. 200m (free view necessary)
- simple teach-in function
- automatic frequency adjustment
- LED function display
- manual ON/OFF switch
- power supply: 230V/50Hz
- integr. overload protection
- dimensions: approx. 45x45x25mm (l-w-h)
- mounting: flush-mounted, suitable for standard flush-mounted boxes
- protection class: IP20
- can be combined with wall switches/transmitters of the radio switch series "KINETIC"
- all details according to manufacturer
Note:
The installation instructions and teach-in function can be found in the enclosed operating instructions.
Technical info
white
KINETIC series
plastic
230V
IP20
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
