RGB LED Controller, 4-pin guide, remote control

This controller is the absolute highlight for your design and decorative lighting, whether you want to connect (from red, green and blue LEDs) finished LED modules or self-created LED circuits, the devise will succeed all your expectations. Regulate with this controller various functions such as blinking, dimming, color transitions and much more.
You only need to place the controller between your current source (12V DC) and the LED system. All functions are easily controlled via the 4 buttons on the remote control, easy handling is guaranteed.
This RGB controller is ideally suited to control our RGB LED modules. You can find these products in our LED online shop.

If there is insufficient control capacity of the 2A per channel for your application, it is possible to work with RGB repeaters. These devices can also be found in our online shop. We would be happy to advise you personally. Simply call us.

- operating voltage: 12V
- power: max. 72W (using 10m strip)
- dimension controller: about 50x35x22mm (l-w-h)
- remote control range: 10m (clear line of sight to the receiver of the controller)
- common positive pole (anode), negative pole (cathode) for each color
- cable length remote control: about 220mm
- connection RGB strips 4-pin jack
- DC socket 2.5x5.5mm for electricity

matching accessories:

• 2m cable connecting from transformer to controller (item number: 10000811)
• 2.5m extension cable (item number: 10007493)
• connection cable for RGB LED Stripes / plug (item number: 10003044)

Features

• 16 pre-programmed colors or color mixtures (the colors are displayed on the remote control)
• dimmer function in 8 brightness levels
• on / off switch
• flash program for automatic color change (16 pre-programmed colors are successively shown at intervals of 0.5 seconds)
• strobe program (16 pre-programmed colors are flashing every 0.5 seconds)
• fading program (16 pre-programmed colors are displayed with transition effect within 4 seconds)
• smooth program - the colors red, green and blue are successively shown at intervals of about 0.3 seconds

The choice of programs is easily selected from your remote control. The range is about 10m, the remote control must have a clear view to the receiver of the controller. A change in the speed of the indicated programs is not possible.