SHALLOW data socket 2x RJ45 | socket with CAT6 socket

network socket 2xRJ45 CAT6, individually or in combination with a socket, in a minimalist design with a velvety surface, screw connection / plug-in terminals
item number: 10038223
from 12.69
 
incl. VAT excl. shipping cost
letter standard delivery
 
technical details:
- color: white / anthracite
- material: plastic
- minimalist and absolutely reduced, modern design
- velvety surface
- operation only on 230V/50Hz
- network socket fully shielded
- front connection: 2x RJ45 socket
- compatibility: CAT5, CAT5e, CAT6, CAT6a
- compatible with all common RJ45 cables
- speed: supports 10 Gigabit Ethernet network (10/100/1000/10000 Mbit/s)
- transmission bandwidth: up to 500MHz
- rear connection: terminal strip for cable assembly, tool-free thanks to snap-in technology
- printed color coding
- module housing made of die-cast zinc
- strain relief with cable ties
- maximum power socket: 250V~/16A
- socket with plug-in protection / shutter
- very narrow frame and no central bar
- mounting type: flush-mounted (claw/screw fastening)
- suitable for cavity wall boxes and flush-mounted switch boxes
- diameter of the mounting box: 68mm
- installation via screw connection / plug-in terminals
- protection class: IP20
- all details according to the manufacturer

SHALLOW network socket
- dimensions: approx. 70x70x29mm (w-h-d)
- without frame

SHALLOW network socket with socket
- dimensions: approx. 152x80x35mm (w-h-d)
- with double frame

Your order includes:
- 1x SHALLOW network socket 2xRJ45 CAT6, white, without frame or
- 1x SHALLOW network socket with socket, white, with 2-fold frame or

- 1x SHALLOW network socket 2xRJ45 CAT6, anthracite, without frame or
- 1x SHALLOW network socket with socket, anthracite, with 2-fold frame

Technical info

SHALLOW series


Safety instructions and important information!
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5 mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point> 200 ° C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.

* all prices including VAT and excluding shipping cost; minimum order 10 euros
** Valid for deliveries for standard shipping within Germany. Delivery times for other countries and information on the calculation of delivery, see here.
highlight-led
  • Payment via bank transfer
LED-FAQ
contact
about us