We send free shipping within Germany!
SHALLOW LED rotary dimmer, with frame | 4 to 300W, anthracit
LED dimmer in a minimalist design with a velvety surface, installation via screw connection, supplied with flush-mounted frame
item number: 10038150
- design: LED dimmer for electronic transformers
- color: anthracite
- Material: plastic
- minimalist and absolutely reduced, modern design
- velvety surface
- operation only on 230V/50Hz
- ON/OFF via push button
- power inductive loads (e.g.: LEDs): 4W to 300W
- suitable for LED bulbs
- can be connected to a changeover switch
- no combination of 2 dimmers possible
- dimming function via rotary switch
- dimmer memory function (saves last dimming level)
- dimming button diameter: approx. 48mm
- dimensions: approx. 80x80x35mm (w-h-d)
- mounting type: flush-mounted (claw/screw fastening)
- suitable for cavity wall boxes and flush-mounted switch boxes
- diameter of the mounting box: 68mm
- installation via screw connection
- protection class: IP20
- all detail according to the manufacturer
Your order includes:
- 1x SHALLOW LED dimmer for electronic transformers, anthracite, with frame
- color: anthracite
- Material: plastic
- minimalist and absolutely reduced, modern design
- velvety surface
- operation only on 230V/50Hz
- ON/OFF via push button
- power inductive loads (e.g.: LEDs): 4W to 300W
- suitable for LED bulbs
- can be connected to a changeover switch
- no combination of 2 dimmers possible
- dimming function via rotary switch
- dimmer memory function (saves last dimming level)
- dimming button diameter: approx. 48mm
- dimensions: approx. 80x80x35mm (w-h-d)
- mounting type: flush-mounted (claw/screw fastening)
- suitable for cavity wall boxes and flush-mounted switch boxes
- diameter of the mounting box: 68mm
- installation via screw connection
- protection class: IP20
- all detail according to the manufacturer
Your order includes:
- 1x SHALLOW LED dimmer for electronic transformers, anthracite, with frame
Technical info
anthracite
indoor area
flush mounting
SHALLOW series
230V
IP20
Safety instructions and important information!
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5 mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point> 200 ° C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
