We send free shipping within Germany!
SHALLOW motion detector 1-750W, with frame | 160°, white
motion detector for ohmic and inductive loads, in a minimalist design with a velvety surface, supplied with a flush-mounted frame
item number: 10037740
- design: motion detector
- color: white
- material: plastic
- minimalist and absolutely reduced, modern design
- velvety surface
- operation only on 230V/50Hz
- slide switch for continuous light, light off and light on when moving
- maximum load for ohmic loads (incandescent lamps): 1-750W
- maximum load for inductive loads (LED lamps): 1-200W
- switching time: 10 seconds - 7 minutes (adjustable)
- sensitivity: 3-2.000 lux (adjustable)
- detection angle: approx. 160°
- range: max. 9m
- installation dimensions: approx. 49x49x30mm (w-h-d)
- dimensions: approx. 80x80x35mm (w-h-d, including frame)
- mounting type: flush-mounted (claw/screw fastening)
- suitable for cavity wall boxes (Ø68mm) and flush-mounted switch boxes (Ø60mm)
- 3-wire technology, suitable for parallel connection
- installation via screw terminals
- protection class: IP20
- all details according to manufacturer
Your order includes:
- 1x SHALLOW motion detector for ohmic and inductive loads, white, with frame
- color: white
- material: plastic
- minimalist and absolutely reduced, modern design
- velvety surface
- operation only on 230V/50Hz
- slide switch for continuous light, light off and light on when moving
- maximum load for ohmic loads (incandescent lamps): 1-750W
- maximum load for inductive loads (LED lamps): 1-200W
- switching time: 10 seconds - 7 minutes (adjustable)
- sensitivity: 3-2.000 lux (adjustable)
- detection angle: approx. 160°
- range: max. 9m
- installation dimensions: approx. 49x49x30mm (w-h-d)
- dimensions: approx. 80x80x35mm (w-h-d, including frame)
- mounting type: flush-mounted (claw/screw fastening)
- suitable for cavity wall boxes (Ø68mm) and flush-mounted switch boxes (Ø60mm)
- 3-wire technology, suitable for parallel connection
- installation via screw terminals
- protection class: IP20
- all details according to manufacturer
Your order includes:
- 1x SHALLOW motion detector for ohmic and inductive loads, white, with frame
Technical info
white
indoor area
flush mounting
SHALLOW series
motion sensor
230V
IP20
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
-The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C)!
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE!
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
-The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C)!
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE!
