T8 LED tube 0,6/1,2/1,5m| 3 light colours, inkl. LED-starter

LED-Röhre, T8, 0,6/1,2/1,5m, 3 Lichtfarben, 9 Type

T8 LED-Röhre in 3 Längen und 3 Lichtfarben

T8 LED-Röhre in 0,6/1,2/1,5m Länge und 3 Lichtfarben

LED T8-Röhre in 3 Lichtfarben, 3 Längen und inkl. LED-Starter

luminous flux: 850/900/950/1650/1700/1800/2300/2400/2250lm, power consumption: 10/18/24W, life span: 25.000h, color rendering index CRI: >80

item number: 10016835

from 4.79 €

incl. VAT excl. shipping cost
Sperrgut

reminder list

ask question about item

Artikelherkunft

item description
Note

- light color: warm white / daylight / cold white
- power: 10 / 18 / 24W
- voltage: 230V / 50Hz
- color temperature: 2500-3500/ 3500-4500/ 6000-7000K
- luminous flux: 850/900/950/ 1650/1700/1800/ 2300/2400/2250 lm
- lifespan: 25.000h
- color rendering index CRI:> 80
- dimensions: 600x30 / 1200x30 / 1500x30 mm (LxØ)
- beam angle: 270°
- socket: T8/G13
- not dimmable
- no flicker and flicker
- warm-up time: up to 60% of the maximum power <1s
- energy efficiency class F
- energy consumption 10/18/24 kWh/1000h

- all details according to manufacturer

NOTES:
- Delivery with starter!
- Lamp not suitable for series wiring!
- Total energy efficiency and light distribution is determined by the construction type of the system!

Note:
LED fluorescent tubes are operated directly with 230V. Therefore, when inserted into traditional fluorescent brackets existing ballast must be removed.

Connection examples:

Leuchtstoffröhre mit KVG oder
VVG in Einzelschaltung

Conventional fluorescent tube with fixed or self-variable resistors in single circuit

When changing fluorescent light tubes into LED light tubes, which were previously operated with ballast, only the starter needs to be replaced using the included LED starter.

Konventionelle Leuchtstoffröhre in
Duoschaltung mit KVG oder VVG

Conventional fluorescent tube with fixed or self-variable resistors in double circuit

When changing fluorescent light tubes into LED light tubes, which were previously operated with ballast in double circuit, only the starter needs to be replaced using the included LED starter.

Konventionelle Leuchtstoffröhre in
Tandemschaltung mit KVG oder VVG

Conventional fluorescent tube with fixed or self-variable resistors in tandem circuit

When changing fluorescent light tubes into LED light tubes, which were previously operated in a tandem circuit and with ballast, the fixed resistors or self-variable must be wired again.

Konventionelle Leuchtstoffröhre mit EVG in
Einzelschaltung

Conventional fluorescent lamp with electronic ballast in single circuit

When changing fluorescent light tubes into LED light tubes, which were previously operated with electronic ballast in a single circuit, must be wired new and the electronic ballast must be disconnected.