We send free shipping within Germany!
Wireless motion detector 90° | Pilota Casa | 8m PIR, indoor
wireless PIR infrared motion detector, coverage: approx. 90°, surface-mounted, flat design approx. 30mm, protection class: IP20
item number: 10015419
- material: plastic, white
- radio frequency: 433.92 MHz
- distance to the transmitter: max. 30m (clear view necessary)
- power supply: 2x AAA batteries (not included)
- dimension of the cover: approx. 80x80mm (lxw)
- construction height: approx. 12mm, with PIR 30mm
- simple learning function (memory function)
- coverage angle: approx. 90 °
- range: about 8m
- switching time: approx. 6s, 15s, 1min, 5min
- sensitivity adjustable ("H": 24h active, "L": only in darkness)
- protection class: IP20
- all details according to manufacturer
Note:
The installation instructions and the teach-in function can be found in the enclosed operating instructions. The motion detector must not be exposed to direct sunlight. Two or more components to be installed must have a minimum distance of 90cm have to each other!
- radio frequency: 433.92 MHz
- distance to the transmitter: max. 30m (clear view necessary)
- power supply: 2x AAA batteries (not included)
- dimension of the cover: approx. 80x80mm (lxw)
- construction height: approx. 12mm, with PIR 30mm
- simple learning function (memory function)
- coverage angle: approx. 90 °
- range: about 8m
- switching time: approx. 6s, 15s, 1min, 5min
- sensitivity adjustable ("H": 24h active, "L": only in darkness)
- protection class: IP20
- all details according to manufacturer
Note:
The installation instructions and the teach-in function can be found in the enclosed operating instructions. The motion detector must not be exposed to direct sunlight. Two or more components to be installed must have a minimum distance of 90cm have to each other!
Technical info
white
PILOTA CASA series
plastic
battery
IP20
Safety instructions and important information
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
- Connection or installation must be performed only by qualified staff.
- Never exceed the maximum connected load.
- No assembly near or even on combustible materials such as wood, etc.
- The 230V components must be connected with at least 1.5mm² cable.
- Please be aware of the appropriate health and safety regulations within your country.
- No installation on or in the vicinity (50cm) of flammable materials (flash point >200°C).
- Turn off or disconnect from the main circuit before starting to work. Otherwise there is a danger to LIFE.
